设为首页 收藏本站
烽火社区 首页 方案 工业控制 马达控制 查看内容
仪器仪表 工业电子 医疗设备 智能装备 智能控制 马达控制 LED照明

FreescaleMC56F8006BLDC马达控制方案

2017-11-24 09:40 AM| 发布者: w阿y狸c| 查看: 1498| 评论: 0

摘要: freescale公司的MC56F8006/56F8002是{方案}56800E内核的数字信号控制器(DSC),包罗有DSP处理功能,MCU功能以及机动的外设,可以创建极高性能比的办理方案.32MHz时的性能到达32MIPS,可广泛用于工业控制,家用电器,马达控 ...

freescale 公司的MC56F8006/56F8002是{方案}56800E内核的数字信号控制器(DSC),包罗有DSP处理功能,MCU功能以及机动的外设,可以创建极高性能比的办理方案. 32 MHz时的性能到达32MIPS,可广泛用于工业控制,家用电器,马达控制,开关电源和电源管理,智能传感器等.本京电港论坛文章先容MC56F8006/56F8002主要特点, 方框架图和内核方框架图, 外设子系统方框架图以及MC56F8006 BLDC/PMSM马达控制子板电路原理图纸和质料清单(BOM).

The 56F8006/56F8002 is a member of the 56800E core-based family of digital signal controllers (DSCs). It combines, on a single chip, the processing power of a DSP and the functionality of a microcontroller with a flexible set of peripherals to create an extremely cost-effective solution.

Because of its low cost, configuration flexibility, and compact program code, the 56F8006/56F8002 is well-suited for many applications. The 56F8006/56F8002 includes many peripherals that are especially useful for cost-sensitive applications, including:

• Industrial control

• Home appliances

• Smart sensors

• Fire and security systems

• Switched-mode power supply and power management

• Power metering

• Motor control (ACIM, BLDC, PMSM, SR, and stepper)

• Handheld power tools

• Arc detection

• Medical device/equipment

• Instrumentation

• Lighting ballast

The 56800E core is based on a dual Harvard-style architecture consisting of three execution units operating in parallel, allowing as many as six operations per instruction cycle. The MCU-style programming model and optimized instruction set allow straightforward generation of efficient, compact DSP and control code. The instruction set is also highly efficient for C compilers to enable rapid development of optimized control applications.

The 56F8006/56F8002 supports program execution from internal memories. Two data operands can be accessed from the on-chip data RAM per instruction cycle. The 56F8006/56F8002 also offers up to 40 general-purpose input/output (GPIO) lines, depending on peripheral configuration.

The 56F8006/56F8002 digital signal controller includes up to 16 KB of program flash and 2 KB of unified data/program RAM. Program flash memory can be independently bulk erased or erased in small pages of 512 bytes (256 words).

MC56F8006主要特点:

On-chip features include:

• Up to 32 MIPS at 32 MHz core frequency

• DSP and MCU functionality in a unified, C-efficient architecture

• On-chip memory

C 56F8006: 16 KB (8K x 16) flash memory

C 56F8002: 12 KB (6K x 16) flash memory

C 2 KB (1K x 16) unified data/program RAM

• One 6-channel PWM module

• Two 28-channel, 12-bit analog-to-digital converters (ADCs)

• Two programmable gain amplifiers (PGA) with gain up to 32x

• Three analog comparators

• One programmable interval timer (PIT)

• One high-speed serial communication interface (SCI) with LIN slave functionality

• One serial peripheral interface (SPI)

• One 16-bit dual timer (2 x 16 bit timers)

• One programmable delay block (PDB)

• One SMBus compatible inter-integrated circuit (I2C) port

• One real time counter (RTC)

• Computer operating properly (COP)/watchdog

• Two on-chip relaxation oscillators ― 1 kHz and 8 MHz (400 kHz at standby mode)

• Crystal oscillator

• Integrated power-on reset (POR) and low-voltage interrupt(LVI) module

• JTAG/enhanced on-chip emulation (OnCE™) for unobtrusive, real-time debugging

• Up to 40 GPIO lines

• 28-pin SOIC, 32-pin LQFP, and 48-pin LQFP packages


图1{京电港论坛}. MC56F8006/MC56F8002 方框架图

图2{京电港论坛}.56800E核方框架图

图3{京电港论坛}.MC56F8006外设子系统方框架图

MC56F8006 BLDC/PMSM马达控制子板

MC56F8006 Controller Daughter Board for BLDC/PMSM Motor Control Drive Freescale’s MC56F8006 Controller Daughter Board for BLDC/PMSM Motor Control Drive, together with a 3-phase BLDC/PMSM Motor Control Drive board, create a single unit for developing BLDC/PMSM motor-control applications.

The daughter board is connected via two connectors to the 3-phase BLDC/PMSM Motor Control Drive board. All necessary signals are available to allow a variety of algorithms to control the 3-phase PMSM and BLDC motors.


图4{京电港论坛}.MC56F8006 BLDC/PMSM马达控制子板外形实物图

MC56F8006 Controller Daughter Board for BLDC/PMSM Motor Control Drive Schematics

图5{京电港论坛}.MC56F8006 BLDC/PMSM马达控制子板电路原理图纸:毗连器和插座

图6{京电港论坛}.MC56F8006 BLDC/PMSM马达控制子板电路原理图纸:控制器和插座

马达控制子板质料清单(BOM):

详情请复制打开此衔接地址:
http://www.freescale.com/files/dsp/doc/data_sheet/MC56F8006.pdf

http://www.freescale.com/files/microcontrollers/doc/user_guide/MC56F8006DBUM.pdf?fpsp=1&WT_TYPE=Users Guides&WT_VENDOR=FREESCALE&WT_FILE_FORMAT=pdf&WT_ASSET=Documentation


鲜花

握手

雷人

路过

鸡蛋

相关阅读

热点图文
推荐阅读
文章排行
返回顶部